ULTON Dram II Style 22mm RTA
Features
510 threading;
Single coil build deck;
Top filling;
MTL option by different airflow nut (Reducer from 0.8mm to 2mm)
Liquid control by rotating the bell;
Airflow improved
VOZOL Ark 30W 1000mAh VW Mod Pod System Vape Starter Kit 3ml/0.6ohm/1.4ohm
Features
Pod Capacity: 3ml
Battery Type: 1000mAh Built-in Battery
Output Wattage: 5~30W
Coil Resistance: 0.6ohm (DL Mesh) / 1.4ohm (MTL Dual)
PVD Acrylic Panels of New Aesthetic Pattern
Independent Coil Design for Simply Replacement
Two Vaping Choices for DL Vaping & MTL Vaping
Biggest Side Fire Button for Smooth Click
0.69" Screen Design to Show All Specifications
Top Filling Cap Design for Easy Filling
Overtime Vaping Protection
Over Temperature Protection
Low / High Resistance Protection
Short Circuit Protection
Low Voltage Protection
Intelligent Hibernation Protection
Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
Features
Materials: Stainless Steel/Ultem/Stabwood
Single Coil
RDA/RDTA Modes
Standard or BF Modes (both RDA/RDTA)
Filling Valve Top-Fill on deck/BF pin
One Sided Airflow
Airflow: Bottom/Lower Side by use of Inserts
Thread: 510
High End Build Quality
Gorgeous Stabwood section (unique to each atty)
Aesthetically pleasing (subjective)
Matching Ultem tube and drip tip
Both a high standard RDA and RDTA
Included standard and BF pins + extensions
RDA and RDTA can both be used with standard or BF pins
Worked great with BF pin as both RDA and RDTA
Can be converted from RDA to RDTA with ease
Very easy build
Fantastic quality Grub Screws
Great performing fill valve (quick and mess free)
3 Ultem Inserts giving very different draws
Inserts can be swapped on the fly
Locking sleeve/top-cap
Smooth airflow
Features
510 threading;
Single coil build deck;
Top filling;
MTL option by different airflow nut (Reducer from 0.8mm to 2mm)
Liquid control by rotating the bell;
Airflow improved
VOZOL Ark 30W 1000mAh VW Mod Pod System Vape Starter Kit 3ml/0.6ohm/1.4ohm
Features
Pod Capacity: 3ml
Battery Type: 1000mAh Built-in Battery
Output Wattage: 5~30W
Coil Resistance: 0.6ohm (DL Mesh) / 1.4ohm (MTL Dual)
PVD Acrylic Panels of New Aesthetic Pattern
Independent Coil Design for Simply Replacement
Two Vaping Choices for DL Vaping & MTL Vaping
Biggest Side Fire Button for Smooth Click
0.69" Screen Design to Show All Specifications
Top Filling Cap Design for Easy Filling
Overtime Vaping Protection
Over Temperature Protection
Low / High Resistance Protection
Short Circuit Protection
Low Voltage Protection
Intelligent Hibernation Protection
Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
Features
Materials: Stainless Steel/Ultem/Stabwood
Single Coil
RDA/RDTA Modes
Standard or BF Modes (both RDA/RDTA)
Filling Valve Top-Fill on deck/BF pin
One Sided Airflow
Airflow: Bottom/Lower Side by use of Inserts
Thread: 510
High End Build Quality
Gorgeous Stabwood section (unique to each atty)
Aesthetically pleasing (subjective)
Matching Ultem tube and drip tip
Both a high standard RDA and RDTA
Included standard and BF pins + extensions
RDA and RDTA can both be used with standard or BF pins
Worked great with BF pin as both RDA and RDTA
Can be converted from RDA to RDTA with ease
Very easy build
Fantastic quality Grub Screws
Great performing fill valve (quick and mess free)
3 Ultem Inserts giving very different draws
Inserts can be swapped on the fly
Locking sleeve/top-cap
Smooth airflow
