AVE40.com - promociones y concursos

[AVE40]

Stunningly Small Starter Kit-Tesla Stealth By Teslacigs


The Tesla Stealth Starter Kit by Teslacigs is stunningly tiny 100 watt box mod with a 2200mAh internal LiPo battery. Standing at 22.5 mm in diameter, the Tesla Stealth can fire down to 1.0 ohm with multiple protections. The Shadow tank features adjustable airflow control, SS316 Coil and Unique bottom internal design, provides incredible vapor production and the best flavor. The Tesla Stealth Starter Kit provides an easy to use stealth vaping setup, which is perfect for the beginners and experienced vapers.

Specifications of Teslacigs Stealth Mod:
Color:silk red/silk black/silk white/silk blue
Material:zinc alloy
Dimension:49.5*25*70mm
Capacity:2200mAh
Maximum output power: 100W
Maximum output voltage: 4.2V
Maximum output current: 40A
Atomizer’s resistance:0.1-3.5Ohm
USB：5V/1A

Teslacigs Shadow Tank:
Adjustable airflow control
Unique bottom internal design
Pre-installed coil (0.28ohms)/Extra Shadow coil (0.6ohms)

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalogue online and navigate through the process for e-cigarettes wholesale online.

 

[AVE40]

Wismec Reuleaux RX200S VS RX200


Reuleaux RX200S has been released, also the innovative version designed by Wismec & Jay Bo. So what’s the difference between Reuleaux RX200S and Reuleaux RX200?

Large of the screen. Reuleaux RX200 is 0.69inch and Reuleaux RX200S is 0.96inch, much larger and you can see all parameters more clearly.

Output Mode. Not only with VW/TC-Ni/TC-Ti/TC-SS but also TCR Mode, which can provide you with various vaping enjoyment.

Maximum Temperature Range in centigrade degree up to 315°C

Specifications of Reuleaux RX200S:
Size: 50.0*40.0*84.0mm
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-200W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/ 200-600°F (TC modes)

Now Reuleaux RX200S is full in stock. A Code AVE405 available, get 5%off when you checkout.

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for e-cigarettes wholesale online.

 

[AVE40]

Joyetech eVic VTwo Mini and eVic VTwo , more color options and firmware

Joyetech eVic VTwo Mini and Joyetech eVic VTwo , both Mods are more elegant and more handsome in appearance, newly added with upgradeable firmware and dual battery protection. Like eGrip II Kit, the new firmware supports Custom Logo, RTC (Real Time Clock) display with clock screen protection, combines unique and attractive styling with a super large OLED screen, and supports RTC/VW/VT/Bypass/TCR modes. In addition, there are various attractive colors for you to cater your preference.

Specifications of Joyetech eVic VTwo Mini：
Size: 22.20*38.20*82.00mm
Output mode: RTC/VW/VT(Ti, Ni, SS316)/bYPASS/TCR(M1,M2,M3)
Ourput Wattage: 1-75W
Resistance Range: 0.05-1.5ohm for VT mode
0.1-3.5ohm for VW/Bypass mode
Temperature Range: 100-315℃/ 200-600℉
Colres: Orange, Blue, White, Burgundy, Black, Gold, Cyan, Red

Specifications of Joyetech eVic VTwo：
Size: 47*25.5*85.6mm
Capacity: 5000mAh
Output mode: RTC/VW/VT(Ni, Ti, SS316)/BYPASS/TCR (M1,M2,M3) Mode
Temperature Range: 100-315℃/200-600˚F
Output Wattage: 1W-80W
Resistance Range: 0.05-1.0ohm for VT mode
Resistance Range: 0.15-3.5ohm for VW/BYPASS mode
Color: Black, Burgundy, Orange, Blue, White, Racing Yellow, Cool Black, Dazzling White

Maybe you have been confusing on which colors to choose, so why not drop us an email to [email protected], to learn more information on both mods? If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.
Visit our site http://www.ave40.com for more awesome deals!

 

[AVE40]

Eleaf iNano, Tiny Starter Kit for Vape Beginners


Brand Eleaf has released its new product, Eleaf iNano Starter Kit , for you guys and gels who just start vaping or for whom to vape at a trip or a party with this portable device. Eleaf iNano has a battery capacity of 650mAh, 0.8ml capacity of atomizer which can be smartly inserted and locked in the box by a magnetic connector. And there are 5 colors for you to cater your preference.

Specifications of Eleaf iNano:
For iNano battery:
Capacity: 650mAh
Size: 29mm*19.5mm*64.5mm
Connector type: magnetic connector
Color: silver, black, grey, gold, hot pink

For iNano atomizer:
Diameter: 10mm
Length: 59mm
Capacity: 0.8ml
Thread type: 510 thread
Color: silver


It’s time for vape beginners to have a try on their first puff from this little tiny iNano starter kit by Eleaf, drop us an email to [email protected], to learn more details. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.
Visit our site http://www.ave40.com for more awesome deals!

 

[AVE40]

Wismec Reuleaux RX75 Kit is coming!



Wismec Reuleaux RX75,designed by Jaybo, inspired by VWT420. Reuleaux RX75 Mod features a replaceable front cover which can protect the OLED screen from scraping and hide all buttons. Magnetic back cover also is the hidden fire button. 75W High Power Output with Variable Temperature Control will provide you with different vaping experiences. Amor Mini features Top E-liquid Filling, Bottom Airflow Control and with E-Liquid Capacity of 2ml. Not only the Amor Mini can perfectly match the Reuleaux RX75, but also the Theorem Atomizer.

Specifications of Wismec Reuleaux RX75 Kit:
Reuleaux RX75
Size: 87*22.5*47mm
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-75W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range:0.1-3.5ohm for VW/ Bypass mode
Temperature Range: 100-315掳C/ 200-600掳F (TC modes)

Amor Mini
Length: 52mm
Diameter:22mm
Capacity: 2ml

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalogue online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Great Power Smok Koopor Primus 300W launching now!

SMOK has also released their first 300W Mod, Smok Koopor Primus 300W for those vapor who are daring to challenge High Wattage. It features 300 Watt, TC Mode (supports SS, NI200 & TI Wire)/VW Mode,Long Battery Running Time and Large OLED Screen. Koopor Primus is powered by 3 x 18650 batteries, the max out put power can up to 300W. With this high power Mod, you can enjoy incredible vaping experience for cloud chasing and best flavor.

Specifications of Koopor Primus 300W:
Zinc Alloy Construction
Dimensions: 100*62.4*28.4mm
Wattage Range: 1.0W - 300W
Voltage Range: 0.8V - 12V
Temperature Range: 200°F - 600°F / 100°C - 315°C
Compatible With Ni200, Titanium, & Stainless Steel Wires
Resistance Range:
0.1Ω - 3.0Ω (VW Mode)
0.06Ω - 2.0Ω (TC Mode)
Input Current Minimum: 2.3A
Typical: 10A, (Max: 22A)
Requires (3) 18650 Batteries (Batteries Sold Separately)
Magnetic Battery Panel
Spring Loaded Brass 510 Pin
Large OLED Screen
Fully Functional Menu System
Firmware Upgradeable (Via Micro USB Only)

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalogue online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Cloud Beast- Smok TFV8, Change Your Vaping Life!


The Smok TFV8 Sub Ohm Tank by SMOK, comparing with the TFV4, TFV8 has 2 bigger adjustable air slots on the bottom which match its shorter heating air tube for high air flow efficiently. The origin of its great power comes from 4 Unique Coils: V8-T8,V8-T6,V8-Q4 and V8 RBA, could bring large cloud with just a few vaping. Besides, it is more convenient to fill e-juice with its bigger refill slot and enjoy more massive cloud of steam with its central air slot. With all these features, this powerful vapor beast can change your vaping life again.

Specifications of Smok TFV8
25.5mm Diameter
6mL Maximum Juice Capacity
5.5mL Juice Capacity with T8-V8 Coil
Superior Stainless Steel Construction
High-Grade Glass Reinforcement
Convenient Top-Fill Design with Hinge Lock
Dual Adjustable Airflow Control at Base
Black Delrin Ultra-Wide Drip Tip
Patented Turbo Engines Coil Structure
0.15ohm V8-T8 Octuple Coil (6.6T) - rated for 50~260W, recommended 120~180W
0.2ohm V8-T6 Sextuple Coil (6.0T) - rated for 50~240W, recommended 110~150W
0.15ohm Q4-Q4 Quad Coil (5.0T) - rated for 50~180W, recommended 90~150W
V8 RBA (4.0T-X) - 18mm Two-Post, Dual Terminal Deck
510 Connection

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Asmodus Minikin 120W Pocket-sized Mod

The Asmodus Minikin 120W has been announced recently. The Minkin is the perfect combination between size and power. It features an all new GX120 dual chip set which can save hyper power and elongate the battery life by helping regulate the dissipation of heat. Powered by dual 18650’s and wattage output can up to 120W. You may also be impressed by its Rubberized Finishin soft hand feeling and its Bright Display which can clearly show you the Voltage, Wattage and battery life.

Specifications of Asmodus Minikin 120W:
Dimensions: 55mm W x 75mm H x 22mm D
Accommodates 2x 18650 sized batteries (not included)
Utilizes the GX120V2 Chip
Output wattage range (power mode with support for SS wire): 5.0 - 120.0 watts
Output wattage range (TC mode): 5.0 - 60.0 watts
Temperature control range: 212°F - 572°F / 100°C - 300°C
Atomizer resistance range: 0.1 - 2.5 ohm
Max output voltage range: 7.5 volts
Output peak current: 35.0 amps
Output voltage range: 6.4 - 9.0 volts
Input peak current: 35.0 amps
Display operating current: 25mA
Standby time: 10 seconds
Vaping time: 10 seconds
Work efficiency: 94%

It’s time for you to go yourown style route with this Minkin120W Pocket-sizedMod. Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Eciggity Billow v3 Plus 25mm RTA - not only plus the size!

The Billow V3 Plus is the latest RTA tank by EHPRO & Eciggity. Compared to the previous version Billow V3 RTA, it features 25mm diameter, which is 2mm larger.The tank capacity and the overall size of the build deck has been increased into 5.4ml and 4mm. But you don’t have to worry about the performance because this Billow V3 Plus Tank still comes with Top Fill, Juice Flow Control, 2 Post Velocity Style Deck, and 2 Adjustable Bottom Cyclops Airflow Holes. You can vape more clouds and taste batter flavor with this new Billow V3 Plus RTA Tank.

Specifications of Billow V3 Plus RTA:
25mm Diameter
5.4ml Tank Capacity
2 Post Velocity Style Deck
18mm Diameter Build Deck
2.5mm Diameter Post Holes
PEEK Insulator
4.5mm Diameter Airflow Holes
Quad 4mm Diameter Wick Holes
2 Adjustable Bottom Cyclops Airflow Holes
Top Fill
Juice Flow Control
Wide Bore Delrin Drip Tip
Rebuild & Rewick Without Emptying E-Juice

Welcome to drop us an email to [email protected]. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

IJOY Tornado Nano Chip Coil sub-ohm tank&RTA

IJOY Tornado Nano Chip Coil sub-ohm tank&RTA, designed by AW in Southern California. It features the innovative build-in chip coil,for electrical conductivity and heat dissipation and 8.6 mm Two Post RTA coil, easy mounting of dual coil builds. Combining a color change glass, it becomes translucent when exposed to sunlight, or vaping for a while. Using the convenient directly unscrew top fill design, users can easily fill the 4ml tank capacity and leaks free. The wide area airflow also delivers cooling to a wider surface area in the subdeck, effectively cooling the entire system.

Specifications of IJOY Tornado Nano:
Color Change Glass
Innovative Chip Coil &Sub ohm system
24mm Diameter
4ml Capacity
18.6mm Big Size Two Post Deck
PEEK Insulator
Direct To Contact 24K Gold Plated 510
Wide Surface Area Cools Entire Subdeck And Deck Of RDTA
Convenient Top Filling System
Delrin Drip Tip，510 Compatible
High Quality stainless steel and Glass Construction

Enter our site to view the catalog. You vendors can navigate through the process to set up your e-cigarette wholesale online account . Or you can drop us an email to [email protected] first.

 

[AVE40]

Hotcig DX75 75W Box Mod with Evolv's DNA75 chipset



The Hotcig DX75 75W Box Mod is one of the first device to set up with Evolv's DNA75 chipset which is highly intelligent, with a maximum output of 75W with 85% efficiency rating alongside temperature control suite. It also adopts a versatile 18650 or 26650 driven chassis a compact form and ample power, sophisticated temperature regulation, and fully customization setting. The Escribe software provides sufficient power to drive Sub-Ohm Tanks, RDAs, and RTAs.

Specifications of Hotcig DX75 TC VW Box Mod:
Single 26650 High-Amp Battery Compatible
Optional 18650 High-Amp Battery w/ Sleeve Adapter
Wattage Output Range: 1~75W
Voltage Output Range: 0.6~6V
Min Kanthal Resistance: 0.25ohm
Min Temperature Resistance: 0.15ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel
Soft Curvature Form Factor
Flashing LED Firing Mechanism
Bottom-Loading Threaded Battery Access
Patented Evolv DNA75 Chipset
Upgradeable Escribe Software
85% Output Efficiency

Welcome to drop us an email to [email protected] or you can enter our site to view the catalog. And you vendors can navigate through the process to set up your e-cigarette online wholesale account.

 

[AVE40]

Hotcig R150 - to carry your new style


Hotcig R150, the fist water and liquid resistance chip in the world adopted, 150watt mod with Temperature Control Mode, powered by Dual 18650 Battery and efficient replaceable cover with many styles and material, this mod enable you to have a new box every day!

Specifications of Hotcig R150:
Output: 1W-150W
Temperature Range: 100℃-300℃ / 300℉-600℉
Coil Supported:Ti, Ni200, SS316, W, Power, coil upgradable
Coil fine adjustable, support atomizer 0.1-3ohm
Powered by Dual 18650 battery, Micro-USB Port and general 510 connector
Model aircraft aluminum alloy attached with abalone shell as the case

Welcome to drop us an email to [email protected] or you can enter our site to view the catalog. And you vendors can navigate through the process to set up your e-cigarette online wholesale account.

 

[AVE40]

Wotofo The Troll RDA V2 For Cloud Chasing



Wotofo has released a new RDA The Wotofo Troll RDA V2 with a new design gift box and more accessories in this package. It features Dual post style which is easy to build,Deeper deck in 10mm can hold more juice, AFC adjustable in chuff cap set, Two different AFC options for vapor in slant option, and flavor for another option. The vapor is more dense and you can put any build in the deck to get your own style.

Specifications of Wotofo The Troll RDA V2:
22mm diameter
Reverse adjustable 510 pin
Dual post style easy build
Bigger wire holes
Deeper deck in 10mm
Two different AFC options
Adjustable broad chuff cap
Peek insulator made in Germany
Gold Plated 510 Connection
Welcome you vendors to view our catalogue online and navigate through the process for wholesale of e-cigarettes, set up your wholesale account or you can drop us an email to [email protected] first.

 

[AVE40]

Vaporesso Target Mini Kit- Revolution In Mini Design


Vaporesso has finally released their mini kit of Target Series－Vaporesso Target Mini Kit, Target Mini Mod with Guardian Tank. One of the smallest mod, easy to use and with many cool features. It adopts dual child locking mechanism, truly carefree filling to avoid overfill, and unique leak resistant structure, It also combines of Direct to Lung and Mouth to Lung settings. Built with CCELL ceramic coil inside, it is guaranteed to deliver the most original flavor of your e-liquid. 40 watts of maximum output and a built in battery of 1400mAh, Target Mini is truly small and day to day kit for you to enjoy your vaping experience.

Specifications of Target Mini Kit:
Target Mini Mod
Diameter: 36.5 x 24.2 x 58.1 mm
Temperature Range: 100℃-315℃/200F-600F
Output Wattage: 5-40W
Suitable Atomizer: VW:0.15Ω-5Ω / VT:0.1Ω-1.0Ω
Standby Current: ﹤30uA
Voltage range: 0-9V
Battery Cell: Lithium 1400mAh Built in
Casting: Zinc Alloy and Stainless Steel
Thread: 510 Thread
Display: 0.49” OLED

Guardian Tank
Diameter: 22 x 55 mm
Capacity: 2.0 ml

You might question what’s the differences between Vaporesso Target Mini and Concil Of Vape Mini Volt v2? Welcome to drop us an email to [email protected] to get your answer. If you are a vendor, set up your wholesale account and view our catalog online for more ecig wholesale price.

 

[AVE40]

Vision Vapros DIY 80 TC Mod Release!


Vision has finally released their first mod - Vision Vapros DIY 80. Vapros DIY 80 is a really strict precision temperature control mod which uses Motherboard take 4 kinds of modes, BYPASS mode, Adjustable power output, the temperature control, and OUT DIY. The Coil will not turn red in temperature control mode. It supports DIY output wattage and automatically compatible with all the kinds of temperature control coil.

Specifications of Vision Vapros DIY 80:
Size: 85mm x 40mm x 22mm
Output power: 5W-80W/200 °F-600 °F
Resistance range: 1) In BYPASS mode, load 0.2-3ohm
2) In Adjustable power output mode, standard load: 0.09-3ohm
3) In the temperature control mode, load 0.03-1ohm
4) In OUT DIY mode, load 0.09-3ohm
Type of battery: 1*18650 2000mAh 30A High rate rechargeable the battery
Low - power consumption: Idle Current ≤ 100uA
Rated input voltage and charging current: 4.2 V DC/900mA


Vision Tech has not only released this new mod Vapros DIY 80, but also the others, coming soon. Keep eyes on AVE40 News or drop us an email to [email protected] to know more about it. If you are a vendor, set up your wholesale account and view our catalog for more ecig wholesale online price.

 

[AVE40]

Joyetech CUBIS Pro Atomizer with newly added QCS Head


New released Tank Joyetech CUBIS Pro, adopts innovative and leak resistant cup design, its coil replacement and juice fill can be achieved by removing this top section from the cup. Newly Added QCS Head, enables to change the cotton easily and LVC Head, features the liquid valve control system. Joyetech redesigned the airflow control structure which allows larger airflow inlet directly from both sides. This CUBIS Pro Atomizer is recommended to fit the eVic VTwo and eVic VTwo Mini mod. With the CUBIS Pro atomizer, you'll gain a perfect flavor and more precise vaping experience ever.

Specifications of CUBIS Pro Atomizer:
Size:22mm*54.5mm
Capacity: 4.0ml
Color: Silver, Black, Burgundy, Orange, Blue, White
Applicable Heads: LVC Clapton-1.5ohm head, NotchCoil 0.25ohm DL head, BF SS316 Series Heads, BF Clapton-1.5ohm head, BF Ni, BF Ti and RBA head
Mouthpiece: 11.5mm*16mm

Welcome to drop us an email to [email protected] to know more details. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Nalu RDA - New breakthrough by Vaporesso


Vaporesso has released their special Tank Vaporesso Nalu RDA and you may have found that this Tank is their first RDA Tank which is designed for vapers, by vapers. Two giant posts can fit your single or double coil builds with independent airflow, stable and strong. The bottom airflow system will get tuns of air flow and the vapor is more dense. This Nalu RDA is recommended to fit the Target Mini Mod. Though there’ s only SS version on this RDA, but Target Mini Mod has 7 types of color to get your own style.

Specifications of Vaporesso Nalu RDA:
Supporting single coil build with independent airflow, stable and strong
Bigger post holes to accommodate larger gauge
Massive drip reserve
No dry hits thanks to the chamber windows
510 threading
Pyrex Glass Tube
bottom airflow system
Diameter: 24mm
Length:39mm

More information of Nalu RDA will be released soon, so pay attention on this page. You can drop us an email to [email protected]. Or set up your wholesale account, view our catalogue online and navigate through the process for wholesale of e-cigarettes online if you are vendor.

 

[AVE40]

Vaporesso Guardian One- the one for your vaping journey


Vaporesso not only release their first RDA Tank but also their first Starter Kit - Vaporesso Guardian One, which adopts dual child locking mechanism that prevents children from accidentally opening the tank and get in contact with the liquid inside. It is truly a carefree filling since the coil would remain inside to avoid overfill. With its unique leak resistance structure, you can rest assured to enjoy vaping with clean hand. The mod itself is compact in design, yet capable of 40W of output. Built with CCELL ceramic coil inside, it is guaranteed to deliver the most original flavor of your e-liquid.

Specifications of Vaporesso Guardian One:
Revolutionary Leak Free Design
No Overfill Ever, Top Filling coil remains INSIDE the tank
Double Child Locking Mechanism
Sleek and Modern Design
CCELL Inside, delivering the original flavor of your e-liquid

It’s time for you to have a trip. Take this Vaporesso Guardian One Kit and enjoy your journey. Welcome to drop us an email to [email protected] and if you are a vendor, set up your wholesale account and view our catalog online for more ecig wholesale price.

 

[AVE40]

Kanger Cupti Starter Kit-Redesigned All-In-One Kit

Kanger has released another all-in-one kit, the Kanger Cupti kit. Everybody loves their first version Nebox Start Kit. Kanger makes a step and redesigns the new Start Kit Cupti. Thought the capacity has been increased to 5ml, it is more compact, smaller and better hand feeling. It also features more powerful output of 75W. With SS 0.5ohm CLOCC coil to bring you more dense vapor and NiCr 1.5ohm CLOCC coil to give you better flavor.

Specifications of Kanger Cupti starter kit:
Capacity: 5.0ML
Drip tip: POM black (can exchange)
Display: OLED display
All in one device
Leak-free
For MTL and DL
Output power: 75W
CLRBA(optional)
Replaceable 18650
Replaceable Pyrex glass
Temperature Control
Durable surface furnishing



It’s time for vape beginners to have a try on their first puff from this Redesigned All-In-One Kit by Kanger, drop us an email to [email protected], to learn more details. If you are a vendor, set up your wholesale account, view our catalog online and navigate through the process for wholesale of e-cigarettes online.

 

[AVE40]

Lemo 3 Atomizer - Fully Equipped And First DIY Device By Eleaf


Eleaf makes their first step on rebuildable coil atomizer, Eleaf Lemo 3. It is not only can be used with replaceable atomizer head, but also pre-made or self-built coil as RTA for DIY fun. Its capacity is 4ml, top filling, smooth and steady bottom airflow for better vaping flavor. What you surprise is the content which includes many spare parts to satisfy your DIY needs and you don’t have to worry about spending time to collect every piece.

Specifications of Eleaf Lemo 3 Atomizer:
Diameter: 23mm
Length: 62mm
Capacity: 4ml
Coil head: 0.3ohm EC coil head,0.25ohm EC NC coil head
Material: Stainless Steel +Pyrex Glass
Rebuildable tank atomizer
Support DIY wires
Adjustable airflow control

Whether it will become another hot dam kit like previous iStick Pico or not, we will see. Welcome to drop us an email to [email protected]. If you are a vendor, set up your ecig wholesale account, view our catalog online to know more about the price and details.