Hola a tod@s!
El silverplay de project sub-ohm es lo que me estaba esperando en mi buzon a que llegara de vuelta a Puerto Rico, y vaya recibimiento!. Siguiendo el movimiento de los atos de alto rendimiento y precios razonables ($39.99) similar a Aqua V2,Orchid, Billow,etc. entra al ruedo el Silverplay.
Llama la atencion su estetica de su top cap en escamas tanque de pirex y su ventilacion, la cual podemos abrir hasta 4 canales exteriores de ventilación, el diseño interno reuerda mucho al Orchid/Aqua , pero con los canales de drenaje llevados al limite.
Este ato es para hacer burradas, y de las gordas! Voy a estar buscandole el setup idoneo y poder hablar mas de produccion y sabor, que a priori he podido probar son excelentes, pero queda camino por recorrer para conseguir la perfección.
Como nota muy curiosa, es que podemos usar accesorios de Kayfun/Orchid reemplazando la chimenea superior del Silverplay dando juego a multiples configuraciones de estetica del ato, asi que promete mucho. En el hilo estare contado todo lo relacionado con el ato asi que pendientes a actualizaciones
Datos tecnicos del ato :
http://www.vapordna.com/Project-Sub-Ohm-SilverPlay-RTA-Atomizer-p/svpy01.htm
Pronto mas fotos, impresiones y conclusiones
El silverplay de project sub-ohm es lo que me estaba esperando en mi buzon a que llegara de vuelta a Puerto Rico, y vaya recibimiento!. Siguiendo el movimiento de los atos de alto rendimiento y precios razonables ($39.99) similar a Aqua V2,Orchid, Billow,etc. entra al ruedo el Silverplay.

Llama la atencion su estetica de su top cap en escamas tanque de pirex y su ventilacion, la cual podemos abrir hasta 4 canales exteriores de ventilación, el diseño interno reuerda mucho al Orchid/Aqua , pero con los canales de drenaje llevados al limite.
Este ato es para hacer burradas, y de las gordas! Voy a estar buscandole el setup idoneo y poder hablar mas de produccion y sabor, que a priori he podido probar son excelentes, pero queda camino por recorrer para conseguir la perfección.
Como nota muy curiosa, es que podemos usar accesorios de Kayfun/Orchid reemplazando la chimenea superior del Silverplay dando juego a multiples configuraciones de estetica del ato, asi que promete mucho. En el hilo estare contado todo lo relacionado con el ato asi que pendientes a actualizaciones




Datos tecnicos del ato :
http://www.vapordna.com/Project-Sub-Ohm-SilverPlay-RTA-Atomizer-p/svpy01.htm
\•Made from 304 Stainless Steel Construction
•22mm in diameter to fit most of your mod flush
•Even with such sophisticated internal design, the SilverPlay™ can still hold a outstanding 3ml of E-Juice
•Top THREE layer heat fins are installed to cool down some of the hottest vape
•Pyrex glass / Stainless Steel Barrel construction to give you that peak window to look at your juice level as well as to serve as a protection to the pyrex glass
•Chimney is a two piece design, top chimney opening is 6mm in diameter to increase cloud and flavor production
•Due to the incredible air vacuum system we put in place, the SilverPlay is leak resistant. From our testing, the SilverPlay has not leaked at all!
•Base is a FOUR post design with split center post for ease of build. Center posts are raised slightly to shorten the distance between your coils and the top chimney, results in amazing flavor and vapor production
•FOUR deep juice channels total to give you sufficient juice delivery
•Total FOUR airflow holes, two gigantic 3mm main airflow holes hits the coils from underneath, two 2mm negative airflow holes to hit the coils from the back
•When FOUR airflow holes are open, you are in cloud chasing mode; when two negative airflow holes are blocked off, you are in flavor chasing mode. Two main airflow holes can also be adjustable while the two negative airflow holes are turned off
•Adjustable airflow control ring is used for ease of controlling your airflow
•Negative Posts are milled to the deck for rigidity and maximum conductivity
•Adjustable Copper 510 connection to ensure perfect fit on most mods and to increase conductivity
•Beautiful SilverPlay™ Logo is engraved on the bottom ring
•Signature Project Sub-Ohm™ Logo is engraved on the barrel of the RTA
•Precisely Engraved with sophisticated Roman Numeral as the serial number to give you that extreme personal touch!
•Comes with signature Project Sub-Ohm Packaging. Elegant and Presentable!
•100% Designed, Engineered, Developed solely by Project Sub-Ohm™!
Pronto mas fotos, impresiones y conclusiones
