Cazado en UKVapers :msn-wink:
A new kind of genesis atomizer is soon to come along from VapeWare Mods!
Yet this one is not your standard, reduced cap genesis...it takes it further...a lot further
Here are the specs highlighting those things that make it really unique and ground breaking:
Technical Specification:
• 22mm width
• All metal parts are made from 304L food grade ss
• Ultra-fine brushed finish
• Center positioned,â€phantom’’ mesh wicking
• Innovative under-pressure tank system
• Only 35mm height (46mm with its own drip tip)
• Net tank capacity: 5,0ml ss tank / 4,7ml glass tank
• Reduced evaporation chamber for intensified flavor and high density vapor
• Adjustable air flow control ring through 4 twin vertical holes at 0.9mm-1.1mm-1.3mm-1.5mm
• All atomizer parts (only 10) can be easily disassembled for cleaning, without any special tools
• Evaporation chamber is surrounded by e-liquid when the tank is more than half full, cooling the atomizer
• Simple way of hooking and clamping the resistance wire on the positive pin, with only one nut used for all wire diameters(up to 0.35mm). You can even use ribbon 0.5mm or double 0.30mm wire
• Easy refilling and emptying the tank using any standard e-liquid bottle without a tip/needle
• The implementation of the center post prevents it from any spinning during usage or even coiling
• Two pieces, drip tip included. Inner part is made from acetal, outer part from ss, for efficient temperature reduction
• Positive post insulator from ketron1000 peek
• 2 tanks, quartz glass and stainless steel included
• Spares bag and ss rod for easy and accurate wick building are included
Impressed yet?
Unique Advanced Features:
Due to its pioneer under-pressure tank system design NextGen has the following exclusive (for a genesis atomizer) features :
• Unlike any other genesis atomizer to date that actually uses "gravity" for the mesh wicking NextGen uses under-pressure to implement that. This means that with each draw, e-liquid advances (rises) through the wick. In addition to the obvious benefits of this approach, no residues are returning into the tank so the liquid always retains its original color and composition.
• Can be positioned vertically, horizontally or even inverted without any leakage
(Pocket friendly).
• No need to search and align the air hole accordingly every time you vape.
• No need to tilt the atomizer for proper wicking.
So i said to myself..wowwww this sounds great but does it deliver????
Enjoy the following pics and videos and judge for yourself......
Further info, release dates and pricing are available here:NextGen
but i will also update this post as information keep rolling in...
Vape Different
I LISTA (martes 28)
II LISTA (miercoles 29)
Revi-Tuto
A new kind of genesis atomizer is soon to come along from VapeWare Mods!
Yet this one is not your standard, reduced cap genesis...it takes it further...a lot further
Here are the specs highlighting those things that make it really unique and ground breaking:
Technical Specification:
• 22mm width
• All metal parts are made from 304L food grade ss
• Ultra-fine brushed finish
• Center positioned,â€phantom’’ mesh wicking
• Innovative under-pressure tank system
• Only 35mm height (46mm with its own drip tip)
• Net tank capacity: 5,0ml ss tank / 4,7ml glass tank
• Reduced evaporation chamber for intensified flavor and high density vapor
• Adjustable air flow control ring through 4 twin vertical holes at 0.9mm-1.1mm-1.3mm-1.5mm
• All atomizer parts (only 10) can be easily disassembled for cleaning, without any special tools
• Evaporation chamber is surrounded by e-liquid when the tank is more than half full, cooling the atomizer
• Simple way of hooking and clamping the resistance wire on the positive pin, with only one nut used for all wire diameters(up to 0.35mm). You can even use ribbon 0.5mm or double 0.30mm wire
• Easy refilling and emptying the tank using any standard e-liquid bottle without a tip/needle
• The implementation of the center post prevents it from any spinning during usage or even coiling
• Two pieces, drip tip included. Inner part is made from acetal, outer part from ss, for efficient temperature reduction
• Positive post insulator from ketron1000 peek
• 2 tanks, quartz glass and stainless steel included
• Spares bag and ss rod for easy and accurate wick building are included
Impressed yet?
Unique Advanced Features:
Due to its pioneer under-pressure tank system design NextGen has the following exclusive (for a genesis atomizer) features :
• Unlike any other genesis atomizer to date that actually uses "gravity" for the mesh wicking NextGen uses under-pressure to implement that. This means that with each draw, e-liquid advances (rises) through the wick. In addition to the obvious benefits of this approach, no residues are returning into the tank so the liquid always retains its original color and composition.
• Can be positioned vertically, horizontally or even inverted without any leakage
(Pocket friendly).
• No need to search and align the air hole accordingly every time you vape.
• No need to tilt the atomizer for proper wicking.
So i said to myself..wowwww this sounds great but does it deliver????
Enjoy the following pics and videos and judge for yourself......
Further info, release dates and pricing are available here:NextGen
but i will also update this post as information keep rolling in...
Vape Different
I LISTA (martes 28)
II LISTA (miercoles 29)
Revi-Tuto
Última edición: